118 results found for 'Haliade-X 12 MW'

118 results found for 'Haliade-X 12 MW'
Order results by

A list of search results

  • 29 May 2024
    Authorities, Business & Finance, Planning & Permitting

    Danish renewable energy developer Ørsted will pay New Jersey USD 125 million (approximately EUR 115 million) to settle claims over the company’s cancellation of two offshore wind farm projects, Ocean Wind 1 and Ocean Wind 2, last year. The state’s Board of Public Utilities (BPU) said the USD 125 million it will receive will be […]

  • 3 July 2019
    R&D, Technology

    GE Renewable Energy has installed three out of four tower sections which will support the prototype Haliade-X 12 MW wind turbine at Maasvlakte in the Port of Rotterdam, the Netherlands. The final tower section will be installed once the nacelle arrives at Maasvlakte during the summer, GE Renewable Energy said. The Haliade-X 12 MW nacelle […]

  • 17 July 2019
    Grid Connection, Technology

    Visser & Smit Hanab has completed the cable connection which will link the prototype Haliade-X 12 MW wind turbine at Maasvlakte 2 in the Port of Rotterdam to the Stedin high-voltage station. The 1.5-kilometre, 66kV connection was tested on 16 and 17 July, after which it was put into operation, Visser & Smit Hanab said. GE Renewable […]

  • 5 June 2018
    R&D, Technology

    A full prototype Haliade-X 12 MW wind turbine will be installed at a yet-to-be-determined site in 2019, GE Renewable Energy said.

  • 1 March 2018
    Business & Finance, R&D, Technology

    GE Renewable Energy GE will invest more than USD 400 million over the next three to five years to develop and deploy the largest, most powerful offshore wind turbine – the Haliade-X 12 MW.

  • 13 November 2019
    R&D, Technology

    A nacelle from GE Renewable Energy’s Haliade-X 12 MW offshore wind turbine has arrived at the Offshore Renewable Energy (ORE) Catapult’s testing facility in Blyth, Northumberland, ahead of a testing programme designed to prepare it for years of operation at sea. This nacelle, comparable in size to six double-decker London buses, will undergo full indoor […]

  • 10 May 2018
    Technology

    GE Renewable Energy has revealed additional details on the size and power of the Haliade-X 12 MW offshore wind turbine.

  • 20 June 2019
    Ports & Logistics, R&D, Technology

    The four tower sections that will be part of GE’s Haliade-X 12 MW wind turbine prototype have arrived in Rotterdam. The four segments left GRI’s site in Seville, Spain, earlier this month. After unloading the tower segments, a series of pre-assembly works will take place, including the installation of some tower segments, GE Renewable Energy said. The […]

  • 11 June 2019
    Ports & Logistics, Technology

    Spanish turbine tower manufacturer GRI has shipped out the four tower sections that will be part of GE’s Haliade-X 12 MW prototype to be installed later this summer in Maasvlakte-Rotterdam. The four segments at GRI’s site in Seville will be arriving in the Netherlands before the end of the month, GE Renewable Energy said. Upon arrival […]

  • 3 July 2019
    Jobs & Recruitment

    GE Renewable Energy plans to recruit more than 200 employees at its LM Wind Power wind turbine blade manufacturing site in Cherbourg, France. 60 out of the additional employees were recently recruited and just began intensive training at the factory’s ‘Center of Excellence’. Opened in April 2018, the Cherbourg facility became the first wind turbine […]

  • 30 August 2019
    Ports & Logistics, Technology

    The nacelle of the prototype GE Haliade-X 12 MW offshore wind turbine has been installed on its tower at Maasvlakte in the Port of Rotterdam. As seen in this screenshot taken from a live webcam feed, the final tower section and the nacelle were installed by a heavy-lift crane tandem at Sif’s facility at Maasvlakte. […]

  • 22 July 2019
    Technology

    GE Renewable Energy has revealed the first nacelle of the Haliade-X 12 MW offshore wind turbine at its production site in Saint-Nazaire, France. The nacelle will be shipped from Saint-Nazaire to Rotterdam-Maasvlakte in the Netherlands over the coming weeks, where its components will be assembled into the Haliade-X 12 MW prototype to be tested there. […]

  • 25 June 2019
    R&D, Technology

    GE Renewable Energy has confirmed that the Haliade-X 12 MW nacelle and the 107-metre long blade will be shipped to ORE Catapult’s testing facilities in Blyth, UK as part of an advanced technology testing program. The program will focus on enhancing the Haliade-X platform before it enters into serial production in 2021. The Haliade-X nacelle, […]

  • 1 April 2019
    Ports & Logistics, R&D, Technology

    Future Wind has organized a ground-breaking event in Maasvlakte, Rotterdam, to mark the start of preparatory activities to host GE’s Haliade-X 12 MW wind turbine prototype. Earlier this year, GE Renewable Energy and Future Wind, a joint venture between Pondera Development and SIF Holding Netherlands, signed an agreement to install the first Haliade-X 12 MW wind […]

  • 15 January 2019
    R&D, Technology

    GRI Renewable Industries has started manufacturing a tower for GE’s Haliade-X 12 MW offshore wind turbine prototype in Sevilla, Spain. The work on the tower for the prototype started at the end of December, the company said. GE announced in March 2018 its plans to invest over USD 400 million over the next three to five […]

  • 12 November 2020
    Technology

    GE Renewable Energy’s Haliade-X 12 MW prototype has received a full type certificate from DNV GL. This full type certification, which follows a provisional type certification announced in June, provides independent verification that the new turbines will operate safely, reliably, and according to design specifications, the turbine maker said. The process of certifying the Haliade-X […]

  • 26 March 2020
    Technology

    ABB has delivered its higher power medium voltage PCS6000 converters for GE’s Haliade-X 12 MW offshore wind turbine prototype installed in the Port of Rotterdam, the Netherlands. Officially inaugurated in mid-December 2019, the Haliade-X 12 MW turbine prototype reached its nominal output of 12 MW feeding into the public grid by the end of 2019 […]

  • 21 February 2019
    R&D, Technology

    GE’s Haliade-X 12 MW offshore wind turbine is well suited and competitive for monopile solution over a wide range of site conditions, according to the specialist engineering firm Gavin and Doherty Geosolutions (GDG). GDG has been working with GE Renewable Energy to develop optimized XL Monopile soil-structure interaction models to support GE’s development of optimized foundation designs for […]

  • 7 February 2020
    Technology

    The HaliadeX-12 MW offshore wind turbine prototype in the Port of Rotterdam has set a new world record by being the first wind turbine ever to generate 288MWh of electricity continuously over the course of 24 hours, GE Renewable Energy said. The previous record of 262MWh of electricity produced by a wind turbine was also […]

  • 18 June 2020
    Technology

    GE’s Haliade-X 12 MW offshore wind turbine prototype has obtained a provisional type certificate by DNV GL. According to GE, this certification demonstrates that the Haliade-X prototype has the highest safety and quality standards. The company expects the full type certificate in the coming months. “This is a very important milestone for us as it confirms […]

  • 19 September 2019
    Wind Farm Update

    Ørsted has selected GE Renewable Energy as the preferred turbine supplier for two of its US offshore wind farms which marks the world’s first commercial deployment of GE’s Haliade-X 12 MW offshore wind turbine. Subject to final agreed and signed contract and all required project approvals, Ørsted will deploy Haliade-X 12MW wind turbines on the […]

  • 3 October 2019

    The Offshore WIND team brings you the top ten most read news in the month of September 2019. Siemens Gamesa Wants a Piece of Senvion German wind turbine manufacturer Senvion has entered into an exclusivity agreement with Siemens Gamesa to pursue negotiations for the sale of selected Services and Onshore assets in Europe. UK Offshore […]

  • 10 October 2019
    R&D

    The first blade for the prototype GE Haliade-X 12 MW offshore wind turbine has arrived at Maasvlakte, according to the live webcam feed at the Port of Rotterdam. LM Wind Power is producing the 107m blades for the prototype turbine at its plant in Cherbourgh, France. According to ECN, part of TNO,  the measurement mast and the scanning LiDAR have been […]

  • 15 April 2019
    Contracts & Tenders

    GE Renewable Energy and GMB Civiel BV have selected Royal HaskoningDHV to provide the foundation design for Haliade-X 12MW, the world’s most powerful offshore wind turbine. The design is based on a piled foundation, with a large concrete block on top and a 28m diameter, said to meet the technical requirements without over-dimensioning. RHDHV said that […]

  • 12 April 2019
    Ports & Logistics

    GE Renewable Energy is currently preparing the site in Maasvlakte, the Netherlands, for installation of its Haliade-X 12MW wind turbine prototype. Preparations of the site which will host the world’s most powerful offshore wind turbine are being carried out in partnership with Future Wind. The two companies signed an agreement at the beginning of the year […]

  • 16 May 2019
    Business & Finance, Technology

    Vattenfall and GE Renewable Energy plan to join forces in the deployment of GE’s new wind turbine, the Haliade-X 12 MW, in Europe. With a capacity of 12MW, the Haliade-X is the largest offshore wind turbine on the market to date. Development and production of the new 12MW turbine will mostly take place in France. […]