NorthWind Offshore Wind Farm Grouting Completed

January 10, 2014

The first project in the world to use a full grouting package with a compressive strength of 180-200 MPa is completed.

ITW Polymers Europe (former Densit) provided the full grouting package with the use of their innovative UHPC product, Ducorit® D4 at NorthWind wind farm in Belgium. The project, which began at the end of March and finished on September 12th, was performed by ITW Densit for GeoSea on board of the VOS Sympathy vessel.

Outstanding fatigue properties and extreme strength of grouting were especially important for GeoSea, as the company always sets focus on safety and cost efficiency. That is why Ducorit® D4 UHPC grouting material with a compressive strength of 200 MPa was chosen for this project. This is the first time ITW Densit has supplied a full grouting package with the use of Ducorit® D4.

The project was developed by NorthWind NV and is located on the Bank Zonder Naam in the North Sea. Its aim is to supply green power for 250,000 households in Belgium. Although 71 monopiles and one substation were grouted during this project, there is one monopole to be grouted and this is expected to be completed at the beginning of 2014. After completion, the wind farm will be able to generate 216 MW from 72 Vestas V112 turbines.

Press release, January 10, 2014; Image: itwpe