ABS and Japan Blue Energy have signed a memorandum of understanding (MoU) to collaborate on strategic studies for a floating wind pilot in Brazil.
Heerema Fabrication Group has completed the first structural element for the jacket foundation for TenneT’s 2 GW IJmuiden Ver Beta transformer platform at its yard in Vlissingen. During the first so-called roll-up, the 1,700-tonne steel element was lifted from a horizontal position into a controlled
Seaway7 is set to begin installing the pin piles for the jacket foundations at the 1.1 GW Inch Cape offshore wind farm in Scotland, according to a Notice to Mariners issued by Inch Cape Offshore Limited. Meanwhile, the project’s wind turbine components have been arriving at the Port of Dundee ahead
BW Ideol’s 2 MW Floatgen floating wind turbine has been in operation for eight years at the SEM-REV offshore test site off Le Croisic, France, with cumulative electricity production now exceeding 40 GWh. The turbine, installed on BW Ideol’s concrete Damping Pool floating foundation, entered operatio
F.lli Righini S.p.A., a leading engineering and manufacturing company specialized in offshore equipment, has successfully designed, tested and delivered advanced Secondary Structure Installation Tools (SSIT) for Van Oord’s Baltica 2 Offshore Wind Project. The supplied systems were developed to suppo
Tokyo-based JFE Engineering Corporation has produced what it says is Japan’s first domestically manufactured monopile for an offshore wind farm. The monopile is destined for the 315 MW Oga–Katagami–Akita project, owned by a consortium consisting of JERA Nex BP, Electric Power Development (J-POWER),
